IPV6
Section: Linux Programmer's Manual (7)
Updated: 2009-02-28
Index
Return to Main Contents
NAME
ipv6, AF_INET6 - Linux IPv6 protocol implementation
SYNOPSIS
#include <sys/socket.h>
#include <netinet/in.h>
tcp6_socket = socket(AF_INET6, SOCK_STREAM, 0);
raw6_socket = socket(AF_INET6, SOCK_RAW, protocol);
udp6_socket = socket(AF_INET6, SOCK_DGRAM, protocol);
DESCRIPTION
Linux 2.2 optionally implements the Internet Protocol, version 6.
This man page contains a description of the IPv6 basic API as
implemented by the Linux kernel and glibc 2.1.
The interface
is based on the BSD sockets interface; see
socket(7).
The IPv6 API aims to be mostly compatible with the
IPv4 API (see
ip(7)).
Only differences are described in this man page.
To bind an
AF_INET6
socket to any process, the local address should be copied from the
in6addr_any
variable which has
in6_addr
type.
In static initializations,
IN6ADDR_ANY_INIT
may also be used, which expands to a constant expression.
Both of them are in network byte order.
The IPv6 loopback address (::1) is available in the global
in6addr_loopback
variable.
For initializations,
IN6ADDR_LOOPBACK_INIT
should be used.
IPv4 connections can be handled with the v6 API by using the
v4-mapped-on-v6 address type;
thus a program only needs to support this API type to
support both protocols.
This is handled transparently by the address
handling functions in the C library.
IPv4 and IPv6 share the local port space.
When you get an IPv4 connection
or packet to a IPv6 socket, its source address will be mapped
to v6 and it will be mapped to v6.
Address Format
struct sockaddr_in6 {
sa_family_t sin6_family; /* AF_INET6 */
in_port_t sin6_port; /* port number */
uint32_t sin6_flowinfo; /* IPv6 flow information */
struct in6_addr sin6_addr; /* IPv6 address */
uint32_t sin6_scope_id; /* Scope ID (new in 2.4) */
};
struct in6_addr {
unsigned char s6_addr[16]; /* IPv6 address */
};
sin6_family
is always set to
AF_INET6;
sin6_port
is the protocol port (see
sin_port
in
ip(7));
sin6_flowinfo
is the IPv6 flow identifier;
sin6_addr
is the 128-bit IPv6 address.
sin6_scope_id
is an ID depending on the scope of the address.
It is new in Linux 2.4.
Linux only supports it for link scope addresses, in that case
sin6_scope_id
contains the interface index (see
netdevice(7))
IPv6 supports several address types: unicast to address a single
host, multicast to address a group of hosts,
anycast to address the nearest member of a group of hosts
(not implemented in Linux), IPv4-on-IPv6 to
address a IPv4 host, and other reserved address types.
The address notation for IPv6 is a group of 16 2-digit hexadecimal
numbers, separated with a ':'.
"::" stands for a string of 0 bits.
Special addresses are ::1 for loopback and ::FFFF:<IPv4 address>
for IPv4-mapped-on-IPv6.
The port space of IPv6 is shared with IPv4.
Socket Options
IPv6 supports some protocol-specific socket options that can be set with
setsockopt(2)
and read with
getsockopt(2).
The socket option level for IPv6 is
IPPROTO_IPV6.
A boolean integer flag is zero when it is false, otherwise true.
- IPV6_ADDRFORM
-
Turn an
AF_INET6
socket into a socket of a different address family.
Only
AF_INET
is currently supported for that.
It is only allowed for IPv6 sockets
that are connected and bound to a v4-mapped-on-v6 address.
The argument is a pointer to an integer containing
AF_INET.
This is useful to pass v4-mapped sockets as file descriptors to
programs that don't know how to deal with the IPv6 API.
- IPV6_ADD_MEMBERSHIP, IPV6_DROP_MEMBERSHIP
-
Control membership in multicast groups.
Argument is a pointer to a
struct ipv6_mreq
structure.
- IPV6_MTU
-
Set the MTU to be used for the socket.
The MTU is limited by the device
MTU or the path mtu when path mtu discovery is enabled.
Argument is a pointer to integer.
- IPV6_MTU_DISCOVER
-
Control path mtu discovery on the socket.
See
IP_MTU_DISCOVER
in
ip(7)
for details.
- IPV6_MULTICAST_HOPS
-
Set the multicast hop limit for the socket.
Argument is a pointer to an
integer.
-1 in the value means use the route default, otherwise it should be
between 0 and 255.
- IPV6_MULTICAST_IF
-
Set the device for outgoing multicast packets on the socket.
This is only allowed
for
SOCK_DGRAM
and
SOCK_RAW
socket.
The argument is a pointer to an interface index (see
netdevice(7))
in an integer.
- IPV6_MULTICAST_LOOP
-
Control whether the socket sees multicast packets that it has send itself.
Argument is a pointer to boolean.
- IPV6_PKTINFO
-
Set delivery of the
IPV6_PKTINFO
control message on incoming datagrams.
Only allowed for
SOCK_DGRAM
or
SOCK_RAW
sockets.
Argument is a pointer to a boolean value in an integer.
-
-
IPV6_RTHDR, IPV6_AUTHHDR, IPV6_DSTOPS, IPV6_HOPOPTS, IPV6_FLOWINFO, IPV6_HOPLIMIT
Set delivery of control messages for incoming datagrams containing
extension headers from the received packet.
IPV6_RTHDR
delivers the routing header,
IPV6_AUTHHDR
delivers the authentication header,
IPV6_DSTOPTS
delivers the destination options,
IPV6_HOPOPTS
delivers the hop options,
IPV6_FLOWINFO
delivers an integer containing the flow ID,
IPV6_HOPLIMIT
delivers an integer containing the hop count of the packet.
The control messages have the same type as the socket option.
All these header options can also be set for outgoing packets
by putting the appropriate control message into the control buffer of
sendmsg(2).
Only allowed for
SOCK_DGRAM
or
SOCK_RAW
sockets.
Argument is a pointer to a boolean value.
- IPV6_RECVERR
-
Control receiving of asynchronous error options.
See
IP_RECVERR
in
ip(7)
for details.
Argument is a pointer to boolean.
- IPV6_ROUTER_ALERT
-
Pass forwarded packets containing a router alert hop-by-hop option to
this socket.
Only allowed for SOCK_RAW sockets.
The tapped packets are not forwarded by the kernel, it is the
user's responsibility to send them out again.
Argument is a pointer to an integer.
A positive integer indicates a router alert option value to intercept.
Packets carrying a router alert option with a value field containing
this integer will be delivered to the socket.
A negative integer disables delivery of packets with router alert options
to this socket.
- IPV6_UNICAST_HOPS
-
Set the unicast hop limit for the socket.
Argument is a pointer to an integer.
-1 in the value means use the route default,
otherwise it should be between 0 and 255.
- IPV6_V6ONLY (since Linux 2.4.21 and 2.6)
-
If this flag is set to true (nonzero), then the socket is restricted
to sending and receiving IPv6 packets only.
In this case, an IPv4 and an IPv6 application can bind
to a single port at the same time.
If this flag is set to false (zero),
then the socket can be used to send and receive packets
to and from an IPv6 address or an IPv4-mapped IPv6 address.
The argument is a pointer to a boolean value in an integer.
The default value for this flag is defined by the contents of the file
/proc/sys/net/ipv6/bindv6only.
The default value for that file is 0 (false).
VERSIONS
The older
libinet6
libc5 based IPv6 API implementation for Linux is not described here
and may vary in details.
Linux 2.4 will break binary compatibility for the
sockaddr_in6
for 64-bit
hosts by changing the alignment of
in6_addr
and adding an additional
sin6_scope_id
field.
The kernel interfaces stay compatible, but a program including
sockaddr_in6
or
in6_addr
into other structures may not be.
This is not
a problem for 32-bit hosts like i386.
The
sin6_flowinfo
field is new in Linux 2.4.
It is transparently passed/read by the kernel
when the passed address length contains it.
Some programs that pass a longer address buffer and then
check the outgoing address length may break.
NOTES
The
sockaddr_in6
structure is bigger than the generic
sockaddr.
Programs that assume that all address types can be stored safely in a
struct sockaddr
need to be changed to use
struct sockaddr_storage
for that instead.
BUGS
The IPv6 extended API as in RFC 2292 is currently only partly
implemented;
although the 2.2 kernel has near complete support for receiving options,
the macros for generating IPv6 options are missing in glibc 2.1.
IPSec support for EH and AH headers is missing.
Flow label management is not complete and not documented here.
This man page is not complete.
SEE ALSO
cmsg(3),
ip(7)
RFC 2553: IPv6 BASIC API.
Linux tries to be compliant to this.
RFC 2460: IPv6 specification.
COLOPHON
This page is part of release 3.27 of the Linux
man-pages
project.
A description of the project,
and information about reporting bugs,
can be found at
http://www.kernel.org/doc/man-pages/.
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- Address Format
-
- Socket Options
-
- VERSIONS
-
- NOTES
-
- BUGS
-
- SEE ALSO
-
- COLOPHON
-
This document was created by
man2html,
using the manual pages.
Time: 19:49:29 GMT, April 27, 2011