Section: Devices and Network Interfaces (4)
Updated: xf86-video-openchrome 0.2.904
Return to Main Contents
openchrome - video driver for VIA Unichromes
is an Xorg driver for VIA chipsets that have an integrated
Unichrome graphics engine.
driver supports the following chipsets: CLE266, KM400/KN400/KM400A/P4M800,
CN400/PM800/PN800/PM880, K8M800, CN700/VM800/P4M800Pro, CX700, P4M890, K8M890,
P4M900/VN896/CN896, VX800 and VX855.
The driver includes 2D acceleration and Xv video overlay extensions.
Flat panel, TV, and VGA outputs are supported, depending on the hardware
3D direct rendering is available using experimental drivers from Mesa
(www.mesa3d.org). There is also an XvMC client library for hardware
acceleration of MPEG1/MPEG2 decoding (not available on the KM/N400)
that uses the Direct Rendering Infrastructure (DRI).
The XvMC client library implements a non-standard
"VLD" extension to the XvMC standard. The current Direct Rendering
Manager (DRM) kernel module is available at dri.sourceforge.net.
The driver supports free modes for Unichrome Pros (K8M800/K8N800, PM800/PN800,
and CN400). For plain Unichromes (CLE266, KM400/KN400), it currently supports
only a limited number of dotclocks, so if you are using X modelines you
must make sure that the dotclock is one of those supported. Supported
dotclocks on plain Unichromes are currently (in MHz): 25.2, 25.312,
26.591, 31.5, 31.704, 32.663, 33.750, 35.5, 36.0, 39.822, 40.0, 41.164,
46.981, 49.5, 50.0, 56.3, 57.284, 64.995, 65.0, 65.028, 74.480,
75.0, 78.8, 81.613, 94.5, 108.0, 108.28, 122.0, 122.726, 135.0,
148.5, 155.8, 157.5, 161.793, 162.0, 175.5, 189.0, 202.5, 204.8,
218.3, 229.5. On top of this, bandwidth restrictions apply for both
Unichromes and Unichrome Pros.
Please refer to xorg.conf() for general configuration
details. This section only covers configuration details specific to this
The following driver
- Option "AccelMethod" "string"
The driver supports "XAA" and "EXA" acceleration methods. The default
method is XAA, since EXA is still experimental. Contrary to XAA, EXA
implements acceleration for screen uploads and downloads (if DRI is
enabled) and for the Render/Composite extension.
- Option "ActiveDevice" "string"
Specifies the active device combination. Any string containing "CRT",
"LCD", "DFP", "TV" should be possible. "CRT" represents anything that
is connected to the VGA port, "LCD" and "DFP" are for laptop panels
(not TFT screens attached to the VGA port), "TV" is self-explanatory.
The default is to use what is detected. The driver is currently unable
to use LCD and TV simultaneously, and will favour the LCD.
- Option "AGPMem" "integer"
Sets the amount of AGP memory that is allocated at X server startup.
The allocated memory will be "integer" kB. This AGP memory is used for
the AGP command buffer (if the option "EnableAGPDMA" is set to "true"), for
DRI textures, and for the EXA scratch area. The driver will allocate at
least one system page of AGP memory, or -- if the AGP command buffer is
used -- at least 2 MB plus one system page. If there is no room for the
EXA scratch area in AGP space, it will be allocated from VRAM. If there is
no room for DRI textures, they will be allocated from the DRI part of
VRAM (see the option "MaxDRIMem"). The default amount of AGP is
32768 kB. Note that the AGP aperture set in the BIOS must be able
to accommodate the amount of AGP memory specified here. Otherwise no
AGP memory will be available. It is safe to set a very large AGP
aperture in the BIOS.
- Option "Center" "boolean"
Enables image centering on DVI displays. The default is disabled.
- Option "DisableIRQ" "boolean"
Disables the vertical blank IRQ. This is a workaround for some mainboards
that have problems with IRQs coming from the Unichrome engine. With IRQs
disabled, DRI clients have no way to synchronize their drawing to Vblank.
(IRQ is disabled by default on the KM400 and K8M800 chipsets.)
- Option "DisableVQ" "boolean"
Disables the use of the virtual command queue. The queue is enabled
- Option "EnableAGPDMA" "boolean"
Enables the AGP DMA functionality in DRM. This requires that DRI is enabled
and will force 2D and 3D acceleration to use AGP DMA. The XvMC DRI
client will also make use of this on the CLE266 to consume much less CPU.
(This option is enabled by default, except on the K8M890 and P4M900.)
- Option "ExaNoComposite" "boolean"
If EXA is enabled (using the option "AccelMethod"), this option enables
acceleration of compositing. Since EXA, and in particular its composite
acceleration, is still experimental, this is a way to disable a misbehaving
- Option "ExaScratchSize" "integer"
Sets the size of the EXA scratch area to "integer" kB. This area is
used by EXA as a last place to look for available space for pixmaps.
Too little space will slow compositing down. This option should be set
to the size of the largest pixmap used. If you have a screen width of
over 1024 pixels and use 24 bpp, set this to 8192. Otherwise you can
leave this at the default 4096. The space will be allocated from AGP
memory if available, otherwise from VRAM.
- Option "LCDDualEdge" "boolean"
Enables the use of dual-edge mode to set the LCD. The default is disabled.
- Option "MaxDRIMem" "integer"
Sets the maximum amount of VRAM memory allocated for DRI clients to
"integer" kB. Normally DRI clients get half the available VRAM size,
but in some cases it may make sense to limit this amount. For example,
if you are using a composite manager and you want to give as much memory
as possible to the EXA pixmap storage area.
- Option "MigrationHeuristic" "string"
Sets the heuristic for EXA pixmap migration. This is an EXA core
option, and on Xorg server versions after 1.1.0 this defaults to
"smart". The openchrome driver performs best with "greedy", so you
should really add this option to your configuration file. The third
possibility is "always", which might become more useful in the future.
- Option "NoAccel" "boolean"
Disables the use of hardware acceleration. Acceleration is enabled
- Option "NoAGPFor2D" "boolean"
Disables the use of AGP DMA for 2D acceleration, even when AGP DMA is
enabled. The default is enabled.
- Option "NoXVDMA" "boolean"
If DRI is enabled, Xv normally uses PCI DMA to transfer video images
from system to frame-buffer memory. This is somewhat slower than
direct copies due to the limitations of the PCI bus, but on the other
hand it decreases CPU usage significantly, particularly on computers
with fast processors. Some video players are buggy and will display
rendering artifacts when PCI DMA is used. If you experience this,
or don't want your PCI bus to be stressed with Xv images, set this
option to "true". This option has no effect when DRI is not enabled.
- Option "PanelSize" "string"
Specifies the size (width x height) of the LCD panel attached to the
system. The sizes 640x480, 800x600, 1024x768, 1280x1024, and 1400x1050
- Option "RotationType" "string"
Enabled rotation by using RandR. The driver only support unaccelerated
RandR rotations "SWRandR". Hardware rotations "HWRandR" is currently
- Option "Rotate" "string"
Rotates the display either clockwise ("CW"), counterclockwise ("CCW") and
upside-down ("UD"). Rotation is only supported unaccelerated. Adding
option "Rotate", enables RandR rotation feature. The RandR allows
clients to dynamically change X screens.
- Option "ShadowFB" "boolean"
Enables the use of a shadow frame buffer. This is required when
rotating the display, but otherwise defaults to disabled.
- Option "SWCursor" "boolean"
Enables the use of a software cursor. The default is disabled:
the hardware cursor is used.
- Option "TVDeflicker" "integer"
Specifies the deflicker setting for TV output. Valid values are "0", "1",
and "2". Here 0 means no deflicker, 1 means 1:1:1 deflicker, and 2 means
- Option "TVDotCrawl" "boolean"
Enables dot-crawl suppression. The default is disabled.
- Option "TVOutput" "string"
Specifies which TV output to use. The driver supports "S-Video",
"Composite", "SC", "RGB", and "YCbCr" outputs. Note that on some
EPIA boards the composite-video port is shared with audio-out and
is selected via a jumper.
- Option "TVPort" "string"
Specifies TV port. The driver currently supports "DVP0", "DVP1",
"DFPHigh" and "DFPLow" ports.
- Option "TVType" "string"
Specifies TV output format. The driver currently supports "NTSC" and
"PAL" timings only.
- Option "VBEModes" "boolean"
Enables the use of VBE BIOS calls for setting the display mode. This mimics
the behaviour of the vesa driver but still provides acceleration and
other features. This option may be used if your hardware works with
the vesa driver but not with the openchrome driver. It may not work
on 64-bit systems. Using "VBEModes" may speed up driver acceleration
significantly due to a more aggressive hardware setting, particularly
on systems with low memory bandwidth. Your refresh rate may be limited
to 60 Hz on some systems.
- Option "VBESaveRestore" "boolean"
Enables the use of VBE BIOS calls for saving and restoring the display state
when the X server is launched. This can be extremely slow on some hardware,
and the system may appear to have locked for 10 seconds or so. The default
is to use the driver builtin function. This option only works if option
"VBEModes" is enabled.
- Option "VideoRAM" "integer"
Overrides the VideoRAM autodetection. This should never be needed.
Unichromes tend to be paired with several different TV encoders.
- VIA Technologies VT1621
Still untested, as no combination with a Unichrome is known or available.
Supports the following normal modes: "640x480" and "800x600". Use
"640x480Over" and "800x600Over" for vertical overscan. These modes
are made available by the driver; modelines provided in xorg.conf
will be ignored.
- VIA Technologies VT1622, VT1622A, VT1623
Supports the following modes: "640x480", "800x600", "1024x768",
"848x480", "720x480" (NTSC only) and "720x576" (PAL only). Use
"640x480Over", "800x600Over", "1024x768Over", "848x480Over",
"720x480Over" (NTSC) and "720x576Over" (PAL) for vertical overscan.
The modes "720x480Noscale" (NTSC) and "720x576Noscale" (PAL) (available
on VT1622 only) provide cleaner TV output (unscaled with only minimal
overscan). These modes are made available by the driver; modelines
provided in xorg.conf will be ignored.
Xorg(), xorg.conf(), Xserver(), X()
Authors include: ...
- CONFIGURATION DETAILS
- TV ENCODERS
- SEE ALSO
This document was created by
using the manual pages.
Time: 19:49:26 GMT, April 27, 2011