STRPTIME
Section: Linux Programmer's Manual (3)
Updated: 2009-12-05
Index
Return to Main Contents
NAME
strptime - convert a string representation of time to a time tm structure
SYNOPSIS
#define _XOPEN_SOURCE /* glibc2 needs this */
#include <time.h>
char *strptime(const char *s, const char *format,
struct tm *tm);
DESCRIPTION
The
strptime()
function is the converse function to
strftime(3)
and converts the character string pointed to by
s
to values which are stored in the
tm
structure pointed to by
tm,
using the format specified by
format.
Here
format
is a character string that consists of field descriptors and text characters,
reminiscent of
scanf(3).
Each field descriptor consists of a
%
character followed by another character that specifies the replacement
for the field descriptor.
All other characters in the
format
string must have a matching character in the input string,
except for whitespace, which matches zero or more
whitespace characters in the input string.
There should be whitespace or other alphanumeric characters
between any two field descriptors.
The
strptime()
function processes the input string from left
to right.
Each of the three possible input elements (whitespace,
literal, or format) are handled one after the other.
If the input cannot be matched to the format string the function stops.
The remainder of the format and input strings are not processed.
The supported input field descriptors are listed below.
In case a text string (such as a weekday or month name)
is to be matched, the comparison is case insensitive.
In case a number is to be matched, leading zeros are
permitted but not required.
- %%
-
The
%
character.
- %a or %A
-
The weekday name according to the current locale,
in abbreviated form or the full name.
- %b or %B or %h
-
The month name according to the current locale,
in abbreviated form or the full name.
- %c
-
The date and time representation for the current locale.
- %C
-
The century number (0-99).
- %d or %e
-
The day of month (1-31).
- %D
-
Equivalent to
%m/%d/%y.
(This is the American style date, very confusing
to non-Americans, especially since
%d/%m/%y
is widely used in Europe.
The ISO 8601 standard format is
%Y-%m-%d.)
- %H
-
The hour (0-23).
- %I
-
The hour on a 12-hour clock (1-12).
- %j
-
The day number in the year (1-366).
- %m
-
The month number (1-12).
- %M
-
The minute (0-59).
- %n
-
Arbitrary whitespace.
- %p
-
The locale's equivalent of AM or PM.
(Note: there may be none.)
- %r
-
The 12-hour clock time (using the locale's AM or PM).
In the POSIX locale equivalent to
%I:%M:%S %p.
If t_fmt_ampm is empty in the
LC_TIME
part of the current locale
then the behavior is undefined.
- %R
-
Equivalent to
%H:%M.
- %S
-
The second (0-60; 60 may occur for leap seconds;
earlier also 61 was allowed).
- %t
-
Arbitrary whitespace.
- %T
-
Equivalent to
%H:%M:%S.
- %U
-
The week number with Sunday the first day of the week (0-53).
The first Sunday of January is the first day of week 1.
- %w
-
The weekday number (0-6) with Sunday = 0.
- %W
-
The week number with Monday the first day of the week (0-53).
The first Monday of January is the first day of week 1.
- %x
-
The date, using the locale's date format.
- %X
-
The time, using the locale's time format.
- %y
-
The year within century (0-99).
When a century is not otherwise specified, values in the range 69-99 refer
to years in the twentieth century (1969-1999); values in the
range 00-68 refer to years in the twenty-first century (2000-2068).
- %Y
-
The year, including century (for example, 1991).
Some field descriptors can be modified by the E or O modifier characters
to indicate that an alternative format or specification should be used.
If the
alternative format or specification does not exist in the current locale, the
unmodified field descriptor is used.
The E modifier specifies that the input string may contain
alternative locale-dependent versions of the date and time representation:
- %Ec
-
The locale's alternative date and time representation.
- %EC
-
The name of the base year (period) in the locale's alternative representation.
- %Ex
-
The locale's alternative date representation.
- %EX
-
The locale's alternative time representation.
- %Ey
-
The offset from
%EC
(year only) in the locale's alternative representation.
- %EY
-
The full alternative year representation.
The O modifier specifies that the numerical input may be in an
alternative locale-dependent format:
- %Od or %Oe
-
The day of the month using the locale's alternative numeric symbols;
leading zeros are permitted but not required.
- %OH
-
The hour (24-hour clock) using the locale's alternative numeric symbols.
- %OI
-
The hour (12-hour clock) using the locale's alternative numeric symbols.
- %Om
-
The month using the locale's alternative numeric symbols.
- %OM
-
The minutes using the locale's alternative numeric symbols.
- %OS
-
The seconds using the locale's alternative numeric symbols.
- %OU
-
The week number of the year (Sunday as the first day of the week)
using the locale's alternative numeric symbols.
- %Ow
-
The number of the weekday (Sunday=0) using the locale's alternative
numeric symbols.
- %OW
-
The week number of the year (Monday as the first day of the week)
using the locale's alternative numeric symbols.
- %Oy
-
The year (offset from
%C)
using the locale's alternative numeric symbols.
The broken-down time structure tm is defined in <time.h>
as follows:
struct tm {
int tm_sec; /* seconds */
int tm_min; /* minutes */
int tm_hour; /* hours */
int tm_mday; /* day of the month */
int tm_mon; /* month */
int tm_year; /* year */
int tm_wday; /* day of the week */
int tm_yday; /* day in the year */
int tm_isdst; /* daylight saving time */
};
RETURN VALUE
The return value of the function is a pointer to the first character
not processed in this function call.
In case the input string
contains more characters than required by the format string the return
value points right after the last consumed input character.
In case
the whole input string is consumed the return value points to the null
byte at the end of the string.
If
strptime()
fails to match all
of the format string and therefore an error occurred the function
returns NULL.
CONFORMING TO
SUSv2, POSIX.1-2001.
NOTES
In principle, this function does not initialize tm but
only stores the values specified.
This means that tm should be initialized before the call.
Details differ a bit between different Unix systems.
The glibc implementation does not touch those fields which are not
explicitly specified, except that it recomputes the
tm_wday
and
tm_yday
field if any of the year, month, or day elements changed.
This function is available since libc 4.6.8.
Linux libc4 and libc5 includes define the prototype unconditionally;
glibc2 includes provide a prototype only when
_XOPEN_SOURCE
or
_GNU_SOURCE
are defined.
Before libc 5.4.13 whitespace
(and the 'n' and 't' specifications) was not handled,
no 'E' and 'O' locale modifier characters were accepted,
and the 'C' specification was a synonym for the 'c' specification.
The 'y' (year in century) specification is taken to specify a year
in the 20th century by libc4 and libc5.
It is taken to be a year
in the range 1950-2049 by glibc 2.0.
It is taken to be a year in
1969-2068 since glibc 2.1.
Glibc Notes
For reasons of symmetry, glibc tries to support for
strptime()
the same format characters as for
strftime(3).
(In most cases the corresponding fields are parsed, but no field in tm
is changed.)
This leads to
- %F
-
Equivalent to %Y-%m-%d, the ISO 8601 date format.
- %g
-
The year corresponding to the ISO week number, but without the century
(0-99).
- %G
-
The year corresponding to the ISO week number.
(For example, 1991.)
- %u
-
The day of the week as a decimal number (1-7, where Monday = 1).
- %V
-
The ISO 8601:1988 week number as a decimal number (1-53).
If the week (starting on Monday) containing 1 January has four or more days
in the new year, then it is considered week 1.
Otherwise, it is the last week
of the previous year, and the next week is week 1.
- %z
-
An RFC-822/ISO 8601 standard timezone specification.
- %Z
-
The timezone name.
Similarly, because of GNU extensions to
strftime(3),
%k
is accepted as a synonym for
%H,
and
%l
should be accepted
as a synonym for
%I,
and
%P
is accepted as a synonym for
%p.
Finally
- %s
-
The number of seconds since the Epoch, 1970-01-01 00:00:00 +0000 (UTC).
Leap seconds are not counted unless leap second support is available.
The glibc implementation does not require whitespace between
two field descriptors.
EXAMPLE
The following example demonstrates the use of
strptime()
and
strftime(3).
#define _XOPEN_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
int
main(void)
{
struct tm tm;
char buf[255];
memset(&tm, 0, sizeof(struct tm));
strptime("2001-11-12 18:31:01", "%Y-%m-%d %H:%M:%S", &tm);
strftime(buf, sizeof(buf), "%d %b %Y %H:%M", &tm);
puts(buf);
exit(EXIT_SUCCESS);
}
SEE ALSO
time(2),
getdate(3),
scanf(3),
setlocale(3),
strftime(3),
feature_test_macros(7)
COLOPHON
This page is part of release 3.27 of the Linux
man-pages
project.
A description of the project,
and information about reporting bugs,
can be found at
http://www.kernel.org/doc/man-pages/.
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- RETURN VALUE
-
- CONFORMING TO
-
- NOTES
-
- Glibc Notes
-
- EXAMPLE
-
- SEE ALSO
-
- COLOPHON
-
This document was created by
man2html,
using the manual pages.
Time: 19:49:25 GMT, April 27, 2011