GROFFER

NAME

SYNOPSIS

[ option ] [ -- ] [ filespec ] -h|--help -v|--version  

DESCRIPTION

The groffer program also includes many of the features for finding and displaying the Unix manual pages (man~pages), such that it can be used as a replacement for a man(1) program. Moreover, compressed files that can be handled by gzip(1) or bzip2(1) are decompressed on-the-fly.

The normal usage is quite simple by supplying a file name or name of a man~page without further options. But the option handling has many possibilities for creating special behaviors. This can be done either in configuration files, with the shell environment variable or on the command line.

The output can be generated and viewed in several different ways available for groff. This includes the groff native X~Window viewer gxditview(1), each Postcript, pdf, or dvi display program, a web browser by generating html in www~mode, or several text~modes in text terminals.

Most of the options that must be named when running groff directly are determined automatically for groffer, due to the internal usage of the grog(1) program. But all parts can also be controlled manually by arguments.

Several file names can be specified on the command line arguments. They are transformed into a single document in the normal way of groff.

Option handling is done in GNU style. Options and file names can be mixed freely. The option `--' closes the option handling, all following arguments are treated as file names. Long options can be abbreviated in several ways.  

OPTION OVERVIEW

breaking options

[ -h~|~--help ] [ -v~|~--version ]

groffer mode options

[ --auto ] [ --default ] [ --default-modes mode1,mode2, ] [ --dvi ] [ --dvi-viewer prog ] [ --groff ] [ --html ] [ --html-viewer prog ] [ --mode display_mode ] [ --pdf ] [ --pdf-viewer prog ] [ --ps ] [ --ps-viewer prog ] [ --source ] [ --text ] [ --to-stdout ] [ --tty ] [ --tty-viewer prog ] [ --www ] [ --www-viewer prog ] [ --x --X ] [ --x-viewer --X-viewer prog ]

options related to groff

[ -T~|~--device device ] [ -Z~|~--intermediate-output~|~--ditroff ]

All further groff short options are accepted.

options for man~pages

[ --apropos ] [ --apropos-data ] [ --apropos-devel ] [ --apropos-progs ] [ --man ] [ --no-man ] [ --no-special ] [ --whatis ]

long options taken over from GNU man

[ --all ] [ --ascii ] [ --ditroff ] [ --extension suffix ] [ --locale language ] [ --local-file ] [ --location~|~--where ] [ --manpath dir1:dir2: ] [ --no-location ] [ --pager program ] [ --sections sec1:sec2: ] [ --systems sys1,sys2, ] [ --troff-device device ]

Further long options of GNU man are accepted as well.

X Window Toolkit options

[ --bd~|~--bordercolor pixels ] [ --bg~|~--background color ] [ --bw~|~--borderwidth pixels ] [ --display X-display ] [ --fg~|~--foreground color ] [ --fn~|~--ft~|~--font font_name ] [ --geometry size_pos ] [ --resolution value ] [ --rv ] [ --title string ] [ --xrm X-resource ]

options for development

[ --debug ] [ --debug-filenames ] [ --debug-grog ] [ --debug-keep ] [ --debug-params ] [ --debug-tmpdir ] [ --do-nothing ] [ --print text ] [ -V ]

filespec arguments

The filespec parameters are all arguments that are neither an option nor an option argument. They usually mean a file name or a man page searching scheme.

In the following, the term section_extension is used. It means a word that consists of a man section that is optionally followed by an extension. The name of a man section is a single character from [1-9on], the extension is some word. The extension is mostly lacking.

No filespec parameters means standard input.

-

stands for standard input (can occur several times).

filename

the path name of an existing file.

man:name(section_extension)

man:name.section_extension name(section_extension) name.section_extension section_extension name search the man~page name in the section with optional extension section_extension.

man:name

man~page in the lowest man~section that has name.

name

if name is not an existing file search for the man~page name in the lowest man~section.

OPTION DETAILS

All short options of groffer are compatible with the short options of groff(1). All long options of groffer are compatible with the long options of man(1).

Arguments for long option names can be abbreviated in several ways. First, the argument is checked whether it can be prolonged as is. Furthermore, each minus sign - is considered as a starting point for a new abbreviation. This leads to a set of multiple abbreviations for a single argument. For example, --de-n-f can be used as an abbreviation for --debug-not-func, but --de-n works as well. If the abbreviation of the argument leads to several resulting options an error is raised.

These abbreviations are only allowed in the environment variable but not in the configuration files. In configuration, all long options must be exact.  

groffer breaking Options

[ -h|--help ]

Print a helping information with a short explanation of option sto standard output.

[ -v--version ]

Print version information to standard output.

groffer Mode Options

In X~Window, many programs create their own window when called. groffer can run these viewers as an independent program in the background. As this does not work in text mode on a terminal (tty) there must be a way to know which viewers are X~Window graphical programs. The groffer script has a small set of information on some viewer names. If a viewer argument of the command-line chooses an element that is kept as X~Window program in this list it is treated as a viewer that can run in the background. All other, unknown viewer calls are not run in the background.

For each mode, you are free to choose whatever viewer you want. That need not be some graphical viewer suitable for this mode. There is a chance to view the output source; for example, the combination of the options --mode=ps and --ps-viewer=less shows the content of the Postscript output, the source code, with the pager less.

--auto

Equivalent to --mode=auto.

--default

Reset all configuration from previously processed command line options to the default values. This is useful to wipe out all former options of the configuration, in and restart option processing using only the rest of the command line.

--default-modes mode1,mode2,

Set the sequence of modes for auto~mode to the comma separated list given in the argument. See --mode for details on modes. Display in the default manner; actually, this means to try the modes x, ps, and tty in this sequence.

--dvi

Equivalent to --mode=dvi.

--dvi-viewer prog

Choose a viewer program for dvi~mode. This can be a file name or a program to be searched in Known X~Window dvi viewers include xdvi(1) and dvilx(1) In each case, arguments can be provided additionally.

--groff

Equivalent to --mode=groff.

--html

Equivalent to --mode=html.

--html-viewer

Choose a web browser program for viewing in html~mode. It can be the path name of an executable file or a program in In each case, arguments can be provided additionally.

--modevalue

Set the display mode. The following mode values are recognized:

Select the automatic determination of the display mode. The sequence of modes that are tried can be set with the --default-modes option. Useful for restoring the default~mode when a different mode was specified before.

Display formatted input in a dvi viewer program. By default, the formatted input is displayed with the xdvi(1) program. --dvi.

After the file determination, switch groffer to process the input like groff(1) would do. This disables the groffer viewing features.

Translate the input into html format and display the result in a web browser program. By default, the existence of a sequence of standard web browsers is tested, starting with konqueror(1) and mozilla(1). The text html viewer is lynx(1).

Display formatted input in a PDF (Portable Document Format) viewer program. By default, the input is formatted by groff using the Postscript device, then it is transformed into the PDF file format using gs(1), or ps2pdf(1). If that's not possible, the Postscript mode (ps) is used instead. Finally it is displayed using different viewer programs. pdf has a big advantage because the text is displayed graphically and is searchable as well.

Display formatted input in a Postscript viewer program. By default, the formatted input is displayed in one of many viewer programs.

Format in a groff~text~mode and write the result to standard output without a pager or viewer program. The text device, latin1 by default, can be chosen with option -T.

Format in a groff~text~mode and write the result to standard output using a text pager program, even when in X~Window.

Equivalent to --mode=html.

Display the formatted input in a native roff viewer. By default, the formatted input is displayed with the gxditview(1) program being distributed together with groff. But the standard X~Window tool xditview(1) can also be chosen with the option --x-viewer . The default resolution is 75~dpi, but 100~dpi are also possible. The default groff device for the resolution of 75~dpi is X75-12, for 100~dpi it is X100. The corresponding groff intermediate output for the actual device is generated and the result is displayed. For a resolution of 100~dpi, the default width of the geometry of the display program is chosen to 850~dpi.

Equivalent to --mode=x.

The following modes do not use the groffer viewing features. They are only interesting for advanced applications.

Generate device output with plain groff without using the special viewing features of groffer. If no device was specified by option -T the groff default ps is assumed.

Output the roff source code of the input files without further processing.

--pdf

Equivalent to --mode=pdf.

--pdf-viewer prog

Choose a viewer program for pdf~mode. This can be a file name or a program to be searched in arguments can be provided additionally.

--ps

Equivalent to --mode=ps.

--ps-viewer prog

Choose a viewer program for ps~mode. This can be a file name or a program to be searched in Common Postscript viewers inlude gv(1), ghostview(1), and gs(1), In each case, arguments can be provided additionally.

--source

Equivalent --mode=source.

--text

Equivalent to --mode=text.

--to-stdout

The file for the chosen mode is generated and its content is printed to standard output. It will not be displayed in graphical mode.

--tty

Equivalent to --mode=tty.

--tty-viewer prog

Choose a text pager for mode tty. The standard pager is less(1). This option is eqivalent to man option --pager=prog. The option argument can be a file name or a program to be searched in arguments can be provided additionally.

--www

Equivalent to --mode=html.

--www-viewer prog

Equivalent to --html-viewer .

--X~|~--x

Equivalent to --mode=x.

--X-viewer -- x-viewer prog

Choose a viewer program for x~mode. Suitable viewer programs are gxditview(1) which is the default and xditview(1). The argument can be any executable file or a program in arguments can be provided additionally.

--

Signals the end of option processing; all remaining arguments are interpreted as filespec parameters.

Besides these, groffer accepts all short options that are valid for the groff(1) program. All non-groffer options are sent unmodified via grog to groff. So postprocessors, macro packages, compatibility with classical troff, and much more can be manually specified.  

Options related to groff

Because of the special outputting behavior of the groff option -Z groffer was designed to be switched into groff~mode ; the groffer viewing features are disabled there. The other groff options do not switch the mode, but allow to customize the formatting process.

--a

This generates an ascii approximation of output in the text~modes. That could be important when the text pager has problems with control sequences in tty mode.

--mfile

Add file as a groff macro file. This is useful in case it cannot be recognized automatically.

--Popt_or_arg

Send the argument opt_or_arg as an option or option argument to the actual groff postprocessor.

--T devname ~|~ --device devname

This option determines groff's output device. The most important devices are the text output devices for referring to the different character sets, such as ascii, utf8, latin1, and others. Each of these arguments switches groffer into a text~mode using this device, to mode~tty if the actual mode is not a text~mode. The following devname arguments are mapped to the corresponding groffer --mode=devname option: dvi, html, and ps. All X* arguments are mapped to mode~x. Each other devname argument switches to mode~groff using this device.

--X

is equivalent to groff -X. It displays the groff intermediate output with gxditview. As the quality is relatively bad this option is deprecated; use --X instead because the x~mode uses an X* device for a better display.

-Z~|~--intermediate-output~|~--ditroff

Switch into groff~mode and format the input with the groff intermediate output without postprocessing; see groff_out(5). This is equivalent to option --ditroff of man, which can be used as well.

All other groff options are supported by groffer, but they are just transparently transferred to groff without any intervention. The options that are not explicitly handled by groffer are transparently passed to groff. Therefore these transparent options are not documented here, but in groff(1). Due to the automatism in groffer, none of these groff options should be needed, except for advanced usage.  

Options for man~pages

--apropos

Start the apropos(1) command or facility of man(1) for searching the filespec arguments within all man~page descriptions. Each filespec argument is taken for search as it is; section specific parts are not handled, such that 7 groff searches for the two arguments 7 and groff, with a large result; for the filespec groff.7 nothing will be found. The language locale is handled only when the called programs do support this; the GNU apropos and man -k do not. The display differs from the apropos program by the following concepts:

Construct a groff frame similar to a man~page to the output of apropos,

each filespec argument is searched on its own.

The restriction by --sections is handled as well,

wildcard characters are allowed and handled without a further option.

--apropos-data

Show only the apropos descriptions for data documents, these are the man(7) sections~4, 5, and 7. Direct section declarations are ignored, wildcards are accepted.

--apropos-devel

Show only the apropos descriptions for development documents, these are the man(7) sections~2, 3, and 9. Direct section declarations are ignored, wildcards are accepted.

--apropos-progs

Show only the apropos descriptions for documents on programs, these are the man(7) sections~1, 6, and 8. Direct section declarations are ignored, wildcards are accepted.

--whatis

For each filespec argument search all man~pages and display their description --- or say that it is not a man~page. This is written from anew, so it differs from man's whatis output by the following concepts

each retrieved file name is added,

local files are handled as well,

the language and system locale is supported,

the display is framed by a groff output format similar to a man~page,

wildcard characters are allowed without a further option.

The following options were added to groffer for choosing whether the file name arguments are interpreted as names for local files or as a search pattern for man~pages. The default is looking up for local files.

--man

Check the non-option command line arguments (filespecs) first on being man~pages, then whether they represent an existing file. By default, a filespec is first tested whether it is an existing file.

--no-man~|~--local-file

Do not check for man~pages. --local-file is the corresponding man option.

--no-special

Disable former calls of --all , --apropos* , and --whatis .

Long options taken over from GNU man

In the following, the man options that have a special meaning for groffer are documented.

If your system has GNU man installed the full set of long and short options of the GNU man program can be passed via the environment variable see man(1).

--all

In searching man~pages, retrieve all suitable documents instead of only one.

-7--ascii

In text~modes, display ASCII translation of special characters for critical environment. This is equivalent to groff -mtty_char; see groff_tmac(5).

--ditroff

Produce groff intermediate output. This is equivalent to groffer -Z .

--extensionsuffix

Restrict man~page search to file names that have suffix appended to their section element. For example, in the file name /usr/share/man/man3/terminfo.3ncurses.gz the man~page extension is ncurses.

--localelanguage

Set the language for man~pages. This has the same effect, but overwrites

--location

Print the location of the retrieved files to standard error.

--no-location

Do not display the location of retrieved files; this resets a former call to --location . This was added by groffer.

--manpath'dir1:dir2:'

Use the specified search path for retrieving man~pages instead of the program defaults. If the argument is set to the empty string "" the search for man~page is disabled.

--pager

Set the pager program in tty~mode; default is less. This is equivalent to --tty-viewer .

--sections'sec1:sec2:'

Restrict searching for man~pages to the given sections, a colon-separated list.

--systems'sys1,sys2,'

Search for man~pages for the given operating systems; the argument systems is a comma-separated list.

--where

Eqivalent to --location .

X~Window~Toolkit Options

Unfortunately these options use the old style of a single minus for long options. For groffer that was changed to the standard with using a double minus for long options, for example, groffer uses the option --font for the X~Window option -font .

See X(7) and the documentation on the X~Window~Toolkit options for more details on these options and their arguments.

--backgroundcolor

Set the background color of the viewer window.

--bdpixels

This is equivalent to --bordercolor .

--bgcolor

This is equivalent to --background .

--bw pixels

This is equivalent to --borderwidth .

--bordercolorpixels

Specifies the color of the border surrounding the viewer window.

--borderwidthpixels

Specifies the width in pixels of the border surrounding the viewer window.

--displayX-display

Set the X~Window display on which the viewer program shall be started, see the X~Window documentation for the syntax of the argument.

--foregroundcolor

Set the foreground color of the viewer window.

--fgcolor

This is equivalent to -foreground .

--fn font_name

This is equivalent to --font .

--fontfont_name

Set the font used by the viewer window. The argument is an X~Window font name.

--ftfont_name

This is equivalent to --font .

--geometrysize_pos

Set the geometry of the display window, that means its size and its starting position. See X(7) for the syntax of the argument.

--resolutionvalue

Set X~Window resolution in dpi (dots per inch) in some viewer programs. The only supported dpi values are 75 and 100. Actually, the default resolution for groffer is set to 75~dpi. The resolution also sets the default device in mode x.

--rv

Reverse foreground and background color of the viewer window.

--title'some text'

Set the title for the viewer window.

--xrm'resource'

Set X~Window resource.

Options for Development

--debug

Enable all debugging options --debug-type . The temporary files are kept and not deleted, the grog output is printed, the name of the temporary directory is printed, the displayed file names are printed, and the parameters are printed.

--debug-filenames

Print the names of the files and man~pages that are displayed by groffer.

--debug-grog

Print the output of all grog commands.

--debug-keep

Enable two debugging informations. Print the name of the temporary directory and keep the temporary files, do not delete them during the run of groffer.

--debug-params

Print the parameters, as obtained from the configuration files, from and the command line arguments.

--debug-tmpdir

Print the name of the temporary directory.

--do-nothing

This is like --version , but without the output; no viewer is started. This makes only sense in development.

--print=text

Just print the argument to standard error. This is good for parameter check.

-V

This is an advanced option for debugging only. Instead of displaying the formatted input, a lot of groffer specific information is printed to standard output:

the output file name in the temporary directory,

the display mode of the actual groffer run,

the display program for viewing the output with its arguments,

the active parameters from the config files, the arguments in and the arguments of the command line,

the pipeline that would be run by the groff program, but without executing it.

Other useful debugging options are the groff option -Z and --mode=groff.  

Filespec Arguments

The strange POSIX behavior to regard all arguments behind the first non-option argument as filespec arguments is ignored. The GNU behavior to recognize options even when mixed with filespec arguments is used througout. But, as usual, the double minus argument -- ends the option handling and interprets all following arguments as filespec arguments; so the POSIX behavior can be easily adopted.

The options --apropos* have a special handling of filespec arguments. Each argument is taken as a search scheme of its own. Also a regexp (regular expression) can be used in the filespec. For example, groffer --apropos '^gro.f$' searches groff in the man~page name, while groffer --apropos groff searches groff somewhere in the name or description of the man~pages.

All other parts of groffer, such as the normal display or the output with --whatis have a different scheme for filespecs. No regular expressions are used for the arguments. The filespec arguments are handled by the following scheme.

It is necessary to know that on each system the man~pages are sorted according to their content into several sections. The classical man sections have a single-character name, either a digit from 1 to 9 or one of the characters n or o.

This can optionally be followed by a string, the so-called extension. The extension allows to store several man~pages with the same name in the same section. But the extension is only rarely used, usually it is omitted. Then the extensions are searched automatically by alphabet.

In the following, we use the name section_extension for a word that consists of a single character section name or a section character that is followed by an extension. Each filespec parameter can have one of the following forms in decreasing sequence.

No filespec parameters means that groffer waits for standard input. The minus option - always stands for standard input; it can occur several times. If you want to look up a man~page called - use the argument man:-.

Next a filespec is tested whether it is the path name of an existing file. Otherwise it is assumed to be a searching pattern for a man~page.

man:name(section_extension), man:name.section_extension, name(section_extension), or name.section_extension search the man~page name in man~section and possibly extension of section_extension.

Now man:name searches for a man~page in the lowest man~section that has a document called name.

section_extension~name is a pattern of 2 arguments that originates from a strange argument parsing of the man program. Again, this searches the man page name with section_extension, a combination of a section character optionally followed by an extension.

We are left with the argument name which is not an existing file. So this searches for the man~page called name in the lowest man~section that has a document for this name.

Several file name arguments can be supplied. They are mixed by groff into a single document. Note that the set of option arguments must fit to all of these file arguments. So they should have at least the same style of the groff language.  

OUTPUT MODES

Several different modes are offered, graphical modes for X~Window, text~modes, and some direct groff~modes for debugging and development.

By default, groffer first tries whether x~mode is possible, then ps~mode, and finally tty~mode. This mode testing sequence for auto~mode can be changed by specifying a comma separated list of modes with the option --default-modes.

The searching for man~pages and the decompression of the input are active in every mode.  

Graphical Display Modes

Known viewers for the graphical display modes and their standard X~Window viewer progams are

in a PDF viewer (pdf~mode),

in a web browser (html or www~mode).

in a Postscript viewer (ps~mode),

X~Window roff viewers such as gxditview(1) or xditview(1) (in x~mode),

in a dvi viewer program (dvi~mode),

The pdf~mode has a major advantage --- it is the only graphical diplay mode that allows to search for text within the viewer; this can be a really important feature. Unfortunately, it takes some time to transform the input into the PDF format, so it was not chosen as the major mode.

These graphical viewers can be customized by options of the X~Window~Toolkit. But the groffer options use a leading double minus instead of the single minus used by the X~Window~Toolkit.  

Text modes

If the variable is not set or empty, groffer assumes that it should use tty~mode.

In the actual implementation, the groff output device latin1 is chosen for text~modes. This can be changed by specifying option -T or --device.

The pager to be used can be specified by one of the options --pager and --tty-viewer, or by the environment variable If all of this is not used the less(1) program with the option -r for correctly displaying control sequences is used as the default pager.  

Special Modes for Debugging and Development

The source~mode with option --source just displays the decompressed input.

Otion --to-stdout does not display in a graphical mode. It just generates the file for the chosen mode and then prints its content to standard output.

The groff~mode passes the input to groff using only some suitable options provided to groffer. This enables the user to save the generated output into a file or pipe it into another program.

In groff~mode, the option -Z disables post-processing, thus producing the groff intermediate output. In this mode, the input is formatted, but not postprocessed; see groff_out(5) for details.

All groff short options are supported by groffer.  

MAN~PAGE~SEARCHING

--man

forces to interpret all file parameters as filespecs for searching man~pages.

--no-man

--local-file disable the man searching; so only local files are displayed.

If neither a local file nor a man~page was retrieved for some file parameter a warning is issued on standard error, but processing is continued.  

Search Algoritm

The only man action that is omitted in groffer are the preformatted man~pages, also called cat~pages. With the excellent performance of the actual computers, the preformatted man~pages aren't necessary any longer. Additionally, groffer is a roff program; it wants to read roff source files and format them itself.

The algorithm for retrieving the file for a man~page needs first a set of directories. This set starts with the so-called man~path that is modified later on by adding names of operating system and language. This arising set is used for adding the section directories which contain the man~page files.

The man~path is a list of directories that are separated by colon. It is generated by the following methods.

The environment variable can be set.

It can be read from the arguments of the environment variable

The man~path can be manually specified by using the option --manpath. An empty argument disables the man~page searching.

When no man~path was set the manpath(1) program is tried to determine one.

If this does not work a reasonable default path from is determined.

We now have a starting set of directories. The first way to change this set is by adding names of operating systems. This assumes that man~pages for several operating systems are installed. This is not always true. The names of such operating systems can be provided by 3 methods.

The environment variable has the lowest precedence.

This can be overridden by an option in

This again is overridden by the command line option --systems.

Several names of operating systems can be given by appending their names, separated by a comma.

The man~path is changed by appending each system name as subdirectory at the end of each directory of the set. No directory of the man~path set is kept. But if no system name is specified the man~path is left unchanged.

After this, the actual set of directories can be changed by language information. This assumes that there exist man~pages in different languages. The wanted language can be chosen by several methods.

Enviroment variable

This is overridden by

This is overridden by

This can be overridden by providing an option in

All these environment variables are overridden by the command line option --locale.

The default language can be specified by specifying one of the pseudo-language parameters C or POSIX. This is like deleting a formerly given language information. The man~pages in the default language are usually in English.

Of course, the language name is determined by man. In GNU man, it is specified in the POSIX~1003.1 based format:

<language>[_<territory>[.<character-set>[,<version>]]],

but the two-letter code in <language> is sufficient for most purposes. If for a complicated language formulation no man~pages are found groffer searches the country part consisting of these first two characters as well.

The actual directory set is copied thrice. The language name is appended as subdirectory to each directory in the first copy of the actual directory set (this is only done when a language information is given). Then the 2-letter abbreviation of the language name is appended as subdirectories to the second copy of the directory set (this is only done when the given language name has more than 2 letters). The third copy of the directory set is kept unchanged (if no language information is given this is the kept directory set). These maximally 3 copies are appended to get the new directory set.

We now have a complete set of directories to work with. In each of these directories, the man files are separated in sections. The name of a section is represented by a single character, a digit between 1 and 9, or the character o or n, in this order.

For each available section, a subdirectory exists containing all man files for this section, where <section> is a single character as described before. Each man file in a section directory has the form man<section>/<name>.<section>[<extension>][.<compression>], where <extension> and <compression> are optional. <name> is the name of the man~page that is also specified as filespec argument on the command line.

The extension is an addition to the section. This postfix acts like a subsection. An extension occurs only in the file name, not in name of the section subdirectory. It can be specified on the command line.

On the other hand, the compression is just an information on how the file is compressed. This is not important for the user, such that it cannot be specified on the command line.

There are 4 methods to specify a section on the command line:

Environment variable

Command line option --sections

Appendix to the name argument in the form <name>.<section>

Preargument before the name argument in the form <section> <name>

It is also possible to specify several sections by appending the single characters separated by colons. One can imagine that this means to restrict the man~page search to only some sections. The multiple sections are only possible for and --sections.

If no section is specified all sections are searched one after the other in the given order, starting with section~1, until a suitable file is found.

There are 4 methods to specify an extension on the command line. But it is not necessary to provide the whole extension name, some abbreviation is good enough in most cases.

Environment variable

Command line option --extension

Appendix to the <name>.<section> argument in the form <name>.<section><extension>

Preargument before the name argument in the form <section><extension> <name>

For further details on man~page searching, see man(1).  

Examples of man files

This is an uncompressed file for the man~page groff in section~1. It can be called by sh# groffer~groff No section is specified here, so all sections should be searched, but as section~1 is searched first this file will be found first. The file name is composed of the following components. must be part of the man~path; the subdirectory and the part stand for the section; is the name of the man~page.

The file name is composed of the following components. must be part of the man~path; the subdirectory and the part stand for the section; is the name of the man~page; the final part stands for a compression with gzip(1). As the section is not the first one it must be specified as well. This can be done by one of the following commands. sh#~groffer~groff.7 sh#~groffer~7~groff sh#~groffer~--sections=7~groff

Here must be in man~path; the subdirectory and the file name part stand for section~1; the name of the man~page is the section has an extension and the file is compressed as with bzip2(1). The file can be viewed with one of the following commands sh#~groffer~ctags.1e sh#~groffer~1e~ctags sh#~groffer~--extension=e~--sections=1~ctags where e works as an abbreviation for the extension emacs21.

The directory is now part of the man~path; then there is a subdirectory for an operating system name next comes a subdirectory for the German language; the section names and are known so far; is the name of the man~page; and signifies the compression that can be handled by gzip(1). We want now show how to provide several values for some options. That is possible for sections and operating system names. So we use as sections~5 and 7 and as system names linux and aix. The command is then

sh# groffer~--locale=de~--sections=5:7~--systems=linux,aix~man sh# LANG=de~MANSECT=5:7~SYSTEM=linux,aix~groffer~man

DECOMPRESSION

ENVIRONMENT

Native groffer Variables

Store options for a run of groffer. The options specified in this variable are overridden by the options given on the command line. The content of this variable is run through the shell builtin `eval'; so arguments containing white-space or special shell characters should be quoted. Do not forget to export this variable, otherwise it does not exist during the run of groffer.

System Variables

If this variable is set this indicates that the X~Window system is running. Testing this variable decides on whether graphical or text output is generated. This variable should not be changed by the user carelessly, but it can be used to start the graphical groffer on a remote X~Window terminal. For example, depending on your system, groffer can be started on the second monitor by the command

sh# DISPLAY=:0.1~groffer~ what.ever &

If one of these variables is set (in the above sequence), its content is interpreted as the locale, the language to be used, especially when retrieving man~pages. A locale name is typically of the form language[_territory[.codeset[@modifier]]], where language is an ISO 639 language code, territory is an ISO 3166 country code, and codeset is a character set or encoding identifier like ISO-8859-1 or UTF-8; see setlocale(3). The locale values C and POSIX stand for the default, i.e. the man~page directories without a language prefix. This is the same behavior as when all 3~variables are unset.

This variable can be used to set the pager for the tty output. For example, to disable the use of a pager completely set this variable to the cat(1) program

sh# PAGER=cat~groffer~ anything

All programs within the groffer script are called without a fixed path. Thus this environment variable determines the set of programs used within the run of groffer.

Groff Variables

If the value of this variable is an existing, writable directory, groffer uses it for storing its temporary files, just as groff does.

Man Variables

Restrict the search for man~pages to files having this extension. This is overridden by option --extension; see there for details.

This variable contains options as a preset for man(1). As not all of these are relevant for groffer only the essential parts of its value are extracted. The options specified in this variable overwrite the values of the other environment variables that are specific to man. All options specified in this variable are overridden by the options given on the command line.

If set, this variable contains the directories in which the man~page trees are stored. This is overridden by option --manpath.

If this is a colon separated list of section names, the search for man~pages is restricted to those manual sections in that order. This is overridden by option --sections.

If this is set to a comma separated list of names these are interpreted as man~page trees for different operating systems. This variable can be overwritten by option --systems; see there for details.

The environment variable is ignored by groffer because the necessary preprocessors are determined automatically.  

CONFIGURATION FILES

System-wide configuration file for groffer.

User-specific configuration file for groffer, where denotes the user's home directory. This file is called after the system-wide configuration file to enable overriding by the user.

Both files are handled for the configuration, but the configuration file in comes first; it is overwritten by the configuration file in the home directory; both configuration files are overwritten by the environment variable everything is overwritten by the command line arguments.

The configuration files contain options that should be called as default for every groffer run. These options are written in lines such that each contains either a long option, a short option, or a short option cluster; each with or without an argument. So each line with configuration information starts with a minus character `-'; a line with a long option starts with two minus characters `--', a line with a short option or short option cluster starts with a single minus `-'.

The option names in the configuration files may not be abbreviated, they must be exact.

The argument for a long option can be separated from the option name either by an equal sign `=' or by whitespace, i.e. one or several space or tab characters. An argument for a short option or short option cluster can be directly appended to the option name or separated by whitespace. The end of an argument is the end of the line. It is not allowed to use a shell environment variable in an option name or argument.

It is not necessary to use quotes in an option or argument, except for empty arguments. An empty argument can be provided by appending a pair of quotes to the separating equal sign or whitespace; with a short option, the separator can be omitted as well. For a long option with a separating equal sign `=', the pair of quotes can be omitted, thus ending the line with the separating equal sign. All other quote characters are cancelled internally.

In the configuration files, arbitrary whitespace is allowed at the beginning of each line, it is just ignored. Each whitespace within a line is replaced by a single space character ` ' internally.

All lines of the configuration lines that do not start with a minus character are ignored, such that comments starting with `#' are possible. So there are no shell commands in the configuration files.

As an example, consider the following configuration file that can be used either in or

# groffer configuration file
#
# groffer options that are used in each call of groffer
--foreground=DarkBlue
--resolution 100
--x-viewer=gxditview -geometry 900x1200
--pdf-viewer xpdf -z 150

The lines starting with # are just ignored, so they act as command lines. This configuration sets four groffer options (the lines starting with `-'). This has the following effects:

Use a text color of DarkBlue in all viewers that support this, such as gxditview.

Use a resolution of 100~dpi in all viewers that support this, such as gxditview. By this, the default device in x mode is set to X100.

Force gxditview(1) as the x-mode viewer using the geometry option for setting the width to 900~dpi and the height to 1200~dpi. This geometry is suitable for a resolution of 100~dpi.

Use xpdf(1) as the pdf-mode viewer with the argument -Z 150.

EXAMPLES

sh#~groffer~groff

If the file exists use it as input. Otherwise interpret the argument as a search for the man~page named groff in the smallest possible man~section, being section 1 in this case.

sh#~groffer~man:groff

search for the man~page of groff even when the file exists.

sh#~groffer~groff.7 sh#~groffer~7~groff

search the man~page of groff in man~section 7. This section search works only for a digit or a single character from a small set.

sh#~groffer~fb.modes

If the file does not exist interpret this as a search for the man~page of fb.modes. As the extension modes is not a single character in classical section style the argument is not split to a search for fb.

sh#~groffer~groff~'troff(1)'~man:roff

The arguments that are not existing files are looked-up as the following man~pages: groff (automatic search, should be found in man~section~1), troff (in section~1), and roff (in the section with the lowest number, being~7 in this case). The quotes around 'troff(1)' are necessary because the paranthesis are special shell characters; escaping them with a backslash character \( and \) would be possible, too. The formatted files are concatenated and displayed in one piece.

sh#~LANG=de~groffer~--man~--www~--www-viever=galeon~ls

Retrieve the German man~page (language de) for the ls program, decompress it, format it to html format (www~mode) and view the result in the web browser galeon. The option --man guarantees that the man~page is retrieved, even when a local file exists in the actual directory.

sh#~groffer~--source~'man:roff(7)'

Get the man~page called roff in man~section 7, decompress it, and print its unformatted content, its source code.

sh#~groffer~--de-p~--in~--ap

This is a set of abbreviated arguments, it is determined as

sh#~groffer~--debug-params~--intermediate-output~--apropos

sh#~cat~file.gz~|~groffer~-Z~-mfoo"

The file is sent to standard input, this is decompressed, and then this is transported to the groff intermediate output mode without post-processing (groff option -Z ), using macro package foo (groff option -m ) .

sh#~echo~'\f[CB]WOW!'~| > groffer --x --bg red --fg yellow --geometry 200x100 -

Display the word WOW! in a small window in constant-width bold font, using color yellow on red background.  

COMPATIBILITY

groffer provides its own parser for command line arguments that is compatible to both POSIX getopts(1) and GNU getopt(1). It can handle option arguments and file names containing white space and a large set of special characters. The following standard types of options are supported.

The option consisting of a single minus - refers to standard input.

A single minus followed by characters refers to a single character option or a combination thereof; for example, the groffer short option combination -Qmfoo is equivalent to -Q~-m~foo .

Long options are options with names longer than one character; they are always preceded by a double minus. An option argument can either go to the next command line argument or be appended with an equal sign to the argument; for example, --long=arg is equivalent to --long~arg.

An argument of -- ends option parsing; all further command line arguments are interpreted as filespec parameters, i.e. file names or constructs for searching man~pages).

All command line arguments that are neither options nor option arguments are interpreted as filespec parameters and stored until option parsing has finished. For example, the command line

sh#~groffer file1 -a -o arg file2

is equivalent to

sh#~groffer -a -o arg -- file1 file2

The free mixing of options and filespec parameters follows the GNU principle. That does not fulfill the strange option behavior of POSIX that ends option processing as soon as the first non-option argument has been reached. The end of option processing can be forced by the option `--' anyway.  

BUGS

You can also use the groff mailing list but you must first subscribe to this list. You can do that by visiting the groff mailing list web page

See groff(1) for information on availability.  

SEE ALSO

groff(1), troff(1)

Details on the options and environment variables available in groff; all of them can be used with groffer.

groff(7)

Documentation of the groff language.

grog(1)

Internally, groffer tries to guess the groff command line options from the input using this program.

chem(1)

Preprocessor of groff that is run automatically.

groff_out(5)

Documentation on the groff intermediate output (ditroff output).

groff_tmac(5)

Documentation on the groff macro files.

man(1)

The standard program to display man~pages. The information there is only useful if it is the man~page for GNU man. Then it documents the options and environment variables that are supported by groffer.

gxditview(1), xditview(1x)

Viewers for groffer's x~mode.

kpdf(1), kghostview(1), evince(1), ggv(1), gv(1), ghostview(1), gs(1)

Viewers for groffer's ps~mode.

kpdf(1), acroread(1), evince(1), xpdf(1), gpdf(1), kghostview(1), ggv(1)

Viewers for groffer's pdf~mode.

kdvi(1), xdvi(1), dvilx(1)

Viewers for groffer's dvi~mode.

konqueror(1), epiphany(1), firefox(1), mozilla(1), netscape(1), lynx(1)

Web-browsers for groffer's html or www~mode.

less(1)

Standard pager program for the tty~mode .

gzip(1), bzip2(1)

The decompression programs supported by groffer.

AUTHOR

COPYING

This file is part of groffer, which is part of groff, a free software project. You can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

You should have received a copy of the GNU General Public License along with groff, see the files COPYING and LICENSE in the top directory of the groff source package. Or read the man~page gpl(1). You can also visit <http://www.gnu.org/licenses/>.

Index

NAME

SYNOPSIS

DESCRIPTION

OPTION OVERVIEW

OPTION DETAILS

groffer breaking Options

groffer Mode Options

Options related to groff

Options for man~pages

Long options taken over from GNU man

X~Window~Toolkit Options

Options for Development

Filespec Arguments

OUTPUT MODES

Graphical Display Modes

Text modes

Special Modes for Debugging and Development

MAN~PAGE~SEARCHING

Search Algoritm

Examples of man files

DECOMPRESSION

ENVIRONMENT

Native groffer Variables

System Variables

Groff Variables

Man Variables

CONFIGURATION FILES

EXAMPLES

COMPATIBILITY

BUGS

SEE ALSO

AUTHOR

COPYING